Safety shoes and safety shoes are foot safety protection

Selection and use of protective shoes
(1) In addition to the selection of a suitable type of protective footwear according to the operating conditions, the protective footwear should also fit well and be comfortable to wear. This is important. Carefully select the appropriate shoe size.
(2) The protective shoes must have a non-slip design, not only to protect people's feet from harm, but also to prevent accidents caused by the operator being slipped.
(3) All kinds of protective shoes with different performances must meet the technical requirements of their respective protective performances, such as the toe not being injured, the feet not being stabbed, and the insulation conductive. But Safety Shoes are not everything.
(4) Carefully check or test before using protective shoes. In electrical and acid-base operations, damaged and cracked protective shoes are dangerous.
(5) After the protective shoes are used, they should be properly kept. After the rubber shoes are used, they should be washed with clean water or disinfectant and dried to extend the service life.

Anti-smashing shoes and steel heads are the same kind, that is, protective safety shoes for toe protection.
Safety shoes and safety shoes are foot safety protections and they also mean the same thing. There are many types of it, such as protecting the toe, piercing, insulation, acid and alkali resistance.
Safety shoes specification
Oil-repellent shoes are used in areas where there is oil or splashed oil; waterproof shoes are used in workplaces where there is water or splashes; cold shoes are used to protect the feet of cryogenic workers from frostbite.
Anti-puncture shoes are used for sole protection to prevent them from being stabbed by various sharp objects.
The main function of anti-smashing shoes is to prevent falling objects from injuring the feet. The front of the shoe has impact resistant material.
The main function of steel-making shoes is to prevent burning, hot-spotting, and piercing, and it should be able to withstand a certain static pressure and withstand a certain temperature, and is not flammable. These shoes are suitable for smelting, furnace, cast iron and so on.
In addition to the above, there are some special matching covers, such as canvas, asbestos, and aluminum film covers.
Selection and maintenance of protective shoes The selection of protective footwear should be based on the hazardous nature and degree of harm in the work environment. Protective shoes should have product certification and product specifications. Before use, read the instructions in accordance with the conditions used, and use it correctly. Special protective shoes should be inspected and kept clean after use, and stored in a dry, pollution-free place.